Test the Installation


In order to test ISL Conference Proxy ports, please use the following commands (one by one) within Windows command prompt or Linux shell (replace <server-address> with your ISL Conference Proxy address).

Note: If you have ISL Conference Proxy running on an internal IP using port forwarding on your firewall, please perform the tests below on a computer within your local network as well as on an external computer (so that you access your ISL Conference Proxy through your external IP - e.g. using a modem connection from your home computer)

Note: If you changed or disabled some of the default ports for ISL Conference Proxy, please modify or omit the commands below accordingly.

Note: Make sure the telnet command is enabled (Control Panel -> Programs -> Turn Windows features on or off -> Telnet Client )

telnet <server-address> 7615

telnet <server-address> 80

telnet <server-address> 443

If you get

Trying <server-address>...

Unable to connect to remote host: Connection refused

then it is not configured properly - either firewall (closed port) or router (missing/incorrect port forwarding). Please inspect the situation or contact your network administrator.

If you get

Connected to <server-address>.

Press enter and you should get

HTTP/1.0 400 Bad Request

Server: ISLCP/4.3.1 <server-address>

(where 4.x.x represents your current Conference Proxy version)

If you see that output, then that port is properly configured for use with ISL Conference Proxy.

If all ISL Conference Proxy ports are properly configured, you have successfully completed the installation and have a running ISL Conference Proxy on your server.

Next Steps:

Administration Interface

Create Users

Starting Products

Tags: isl conference proxy, set up, installation, test, telnet

Was this article helpful?